Industry solution
High-bay replacement and linear task lighting for industry
A plant manager replaces 40 W fluorescent tubes with linear LED and needs 70-80% energy cut, uniform floor brightness and no maintenance ladder access for years.
What usually goes wrong here
- Energy cost and peak demand charges
- Tube failure in a hot, dusty or vibrating area
- Lighting the aisle, not just the ceiling
- Downtime during changeover
Send us two things
- Run length per zone and the depth of the cove or reveal
- Mounting surface, viewing distance and target CCT
Reply includes strip spec, driver sizing and feed points.
Recommended build
What this solution is built from
Selection rules
These are the four decisions that decide whether the site accepts the installation.
| Photometric target | lux at the working plane, not lumens at the fixture |
|---|---|
| IP65 + IK08 for dusty or impact-prone areas; aluminium housing for heat | |
| 5-year warranty expectation for industrial specs | |
| Driver replaceable without throwing away the housing |
Installation notes
Keep the existing housing where it is sound — retrofit the strip into the fixture. That is the cheapest route to the energy saving and it shortens the pay-back to under two years in most plants.
Send the current wattage and fixture count — we model the saving and the retrofit spec.
We answer with a line-by-line spec you can forward to your installer without re-translating it.