A solution page starts from the problem on site and ends with a spec you can paste into an RFQ — not from a product list. Pick your room.
Projects do not buy "LED strip lights". They buy a light line that solves a lighting problem in one specific place. Each solution below starts from the buyer's problem, then shows the strip type,specs and installation logic — so you can spec it without guessing.
A shop fit-out team needs a bright, even light line inside a shallow coves and under shelves, without visible dots reflected in glossy product packaging or glass.
A hotel renovation needs one lighting language across lobbies, corridors, suites and restaurants — warm, dimmable, and identical across 200 rooms ordered in three batches.
An architect wants a continuous light line on a cornice or roof edge that survives weather, is invisible by day, and is serviceable from a ladder.
A developer fits 300 units and needs the same warm line under kitchen cabinets, in stair voids and behind mirrors, installed by different subcontractors without on-site tuning.
A plant manager replaces 40 W fluorescent tubes with linear LED and needs 70-80% energy cut, uniform floor brightness and no maintenance ladder access for years.
A landscape architect lights garden paths, tree pits and pool edges with a line that has to be invisible in daylight and rated for 24/7 outdoor use.
A shopfitter needs a line inside a 60 mm deep cabinet that makes products stand out, does not show the strip itself, and runs cool enough not to scorch wood.
A sign maker outlines letters and shopfront frames and needs a bendable, thin line that survives wind and rain on an external fascia.
We return board width, density, CCT, CRI, IP, driver sizing and feed spacing — per zone, per drawing.