SMD5050 LED Strip 60 LEDs/m
Classic SMD5050 strip on a 10 mm PCB — a proven workhorse for coves, shelves and signage backlighting with strong, even output.
14.4W/m · DC12V · IP20 / IP44 / IP65 / IP68
SMD LED Strip
SMD2835 LED Strip 120 LEDs/m
High-efficiency SMD2835 strip — the most widely used solution for linear general lighting in commercial and residential projects. Available in 60 / 120 / 180 LEDs/m versions.
- SMD2835 LEDs on 8 mm PCB
- 60 / 120 / 180 LEDs/m versions
- 12V constant voltage
- IP20 / IP44 / IP65 versions (IP68 optional)
Typical values shown. Custom density, CCT, CRI, IP rating, connector and packing on request — see Custom / OEM / ODM.
Technical specification
Classic SMD strip lights in 2835 / 5050 / 5630 packages — reliable workhorses for general illumination and linear lighting projects.
| LED type | SMD2835 |
|---|---|
| LED density | 120 LEDs/m (60 / 180 LEDs/m available) |
| Power | 9W/m (120 LEDs/m); 5W/m (60 LEDs/m); 18W/m (180 LEDs/m) |
| Voltage | DC12V |
| PCB width | 8mm |
| IP rating | IP20 / IP44 / IP65 (IP68 with silicone sleeve on request) |
| Colours | White / Warm White / Red / Blue / Green / Yellow |
| Packing | 5 m / reel (300–600 LEDs per reel), 8 mm PCB |
| Customization | Density, IP rating, color and reel length — contact us |
Typical applications
- Cabinet lighting
- Shelf lighting
- General linear lighting
Where this is used
Project solutions using this strip
Retail Store & Shopfront Lighting
A shop fit-out team needs a bright, even light line inside a shallow coves and under shelves, without visible dots reflected in glossy product packaging or glass.
Factory, Warehouse & Industrial Lighting
A plant manager replaces 40 W fluorescent tubes with linear LED and needs 70-80% energy cut, uniform floor brightness and no maintenance ladder access for years.
Before you order
Questions buyers ask about this strip
Why does my LED strip flicker?
Flicker is almost never the LED. It is the driver, the dimmer or a bad joint. Find which one in three steps.
Cut an LED strip and only part of it lights up — what did I do wrong?
Two mistakes cause 90% of this: cutting on the wrong mark, and wiring a reel from both ends by mistake.
How do I size the power supply for an LED strip?
Total watts divided by 0.8, plus headroom. Undersizing is the cheapest saving and the most expensive mistake on site.
The strip I bought is not bright enough — is it the LEDs?
Brightness is watts × efficiency × LEDs per metre. Usually the density, not the power, is the missing number.
Same family
Other SMD LED Strip options
Get the datasheet and a price for this strip
Send quantity, target CCT and delivery market. We answer with spec and price, usually in one working day.