LED Controller

2.4G RF RGB+CCT LED Controller with Touch Remote

Compact 2.4GHz RF controller for RGB+CCT (RGBW) strip. Touch colour wheel, CCT slider and brightness dimming on the remote, with 30 m control range and zone pairing — no hub, no App, works straight out of the box.

  • Touch colour wheel + CCT slider remote included
  • RF 2.4 GHz, control range up to 30 m
  • 6 A per channel, 15 A total output
  • Pair multiple controllers into zones
  • Power-off state memory
Request a quote Match a different brand

Typical values shown. Custom density, CCT, CRI, IP rating, connector and packing on request — see Custom / OEM / ODM.

Technical specification

2.4G RF, WiFi, Zigbee and wall-mounted touch panel controllers for single-color, CCT, RGB, RGBW and RGB+CCT strips — dimming, colour and zone control for every project size.

Every figure below is a typical value for the standard build. Density, board width, CCT, CRI, IP rating, cut pitch, connector and packing are all made to order — send us the numbers you need and we confirm them in writing with the sample.

Power6A per channel, 15A total (72–360W)
VoltageDC12V / DC24V
IP ratingIP20
Control type2.4 GHz RF wireless remote (touch panel)
Input voltageDC12V / DC24V
Output channels5CH (R / G / B / C / W), common anode
Output current6 A per channel max, 15 A total max
Remote distance≤ 30 m line of sight
PWM frequency1.5 kHz (default)
Lighting modesStatic colours + 3 dynamic modes, speed and brightness adjustable
Zone controlPair/unlink controllers to remote zones within 3 s after power-on
Dimensions85 × 45 × 23 mm
Working temperature-20 °C to +60 °C
CertificationCE, RoHS, FCC
Warranty2 years
Installation & use

How to install 2.4G RF RGB+CCT LED Controller with Touch Remote

The controller sits between the power supply and the strip. Match voltages first, then pair the remote.

Step by step

  1. Connect the 12/24 V power supply output to the controller input terminals: V+ to +, V− to −. Polarity errors destroy the output stage instantly.
  2. Connect the strip: R, G, B and W/C wires to the matching output terminals; the strip common wire (+) goes to V+.
  3. Power up. Within 3 seconds, press the zone 'on' button on the remote to pair the controller to that zone — the strip flashes once to confirm.
  4. To unlink, press the zone 'on' button 5 times within 3 s of power-on, or 5 times continuously at any time.
  5. Load test at full white before closing the profile or housing — total draw must stay under 15 A.

Before you power up

  • Do not exceed 6 A per channel — overloading one colour channel is the most common failure cause.
  • Keep controllers and receivers away from large metal enclosures; RF range drops sharply inside metal.
  • One remote can hold several controllers in one zone for long runs; sync is automatic between receivers.

Typical applications

  • RGB / RGBW LED strip dimming and colour control
  • Cabinet and cove lighting zones
  • Retail display colour changes
  • Hotel and bar scene lighting
Same family

Other LED Controller options

WiFi 5-in-1 Smart LED Controller

WiFi 5-in-1 Smart LED Controller

One controller for every strip type: RGB, RGBW, RGB+CCT, CCT and single-colour dimming. Control by Tuya/Smart Life App over 2.4 GHz WiFi, voice via Alexa and Google Assistant, or pair a 2.4 G RF remote — mode and power-on state are configurable.

5A per channel, 10A total, 270W max · DC12–24V (36/48/54V optional) · IP20

Specs Get a Quote
Zigbee 3.0 5-in-1 Smart LED Controller

Zigbee 3.0 5-in-1 Smart LED Controller

Zigbee 3.0 plus 2.4 G RF 5-in-1 controller for RGB, RGBW, RGB+CCT, CCT and dimming strips. Joins any Zigbee 3.0 hub (SmartThings, Tuya and similar) for whole-home automation, and still runs directly from an RF remote without a hub.

5A per channel, 10A total, 270W max · DC12–24V (36/48/54V optional) · IP20

Specs Get a Quote
4-Zone Wall Touch Panel Controller RGB+CCT

4-Zone Wall Touch Panel Controller RGB+CCT

Flush-mount tempered-glass touch panel for RGB+CCT strip: colour wheel, CCT slider and brightness on the wall, with four independent zones. RF 2.4 GHz output drives receivers up to 30 m away and passes through walls — ideal for whole-floor lighting control.

3A per channel, 12A total (144W at 12V) · DC12–24V · IP20

Specs Get a Quote

Get the datasheet and a price for this strip

Send quantity, target CCT and delivery market. We answer with spec and price, usually in one working day.

Request a quote WhatsApp
WhatsApp Request Quote