COB LED Strip 320 LEDs/m
Cost-optimized COB strip for projects that need a smooth light line at a balanced price point.
8W/m · DC24V · IP20 / IP65
COB LED Strip
COB LED Strip 480 LEDs/m
Continuous dot-free light line with chip-on-board technology. Uniform output with no visible LED spots, even on glossy or reflective surfaces.
- Seamless dot-free light line
- Flexible PCB for curves and coves
- Instant full brightness, no flicker
- IP20 / IP65 / IP67 versions available
Typical values shown. Custom density, CCT, CRI, IP rating, connector and packing on request — see Custom / OEM / ODM.
Technical specification
Chip-on-board LED strips with a seamless, dot-free light line — ideal for cove lighting, retail displays and reflective surfaces.
| LED type | COB (chip-on-board) |
|---|---|
| LED density | 480 LEDs/m |
| Power | 10W/m (8W/m / 12W/m / 15W/m optional) |
| Voltage | DC24V (DC12V optional) |
| Luminous flux | 800–1000 lm/m (3000K) |
| Beam angle | 120° |
| CCT | 2700K / 3000K / 4000K / 6000K |
| CRI | Ra90+ (Ra95+ optional) |
| PCB width | 5mm / 8mm / 10mm |
| Cutting length | 24.9mm (DC24V) / 25mm (DC12V) |
| IP rating | IP20 / IP65 / IP67 |
| Colours | Fixed white, RGB, RGBW on request |
| Warranty | 3 years |
| Packing | 5m / reel, anti-static bag; custom reel length available |
| Customization | Custom PCB width, density, CCT, CRI, IP rating, cable length, connector and packaging |
Typical applications
- Cove lighting
- Retail displays
- Cabinet lighting
- Architectural linear lighting
Where this is used
Project solutions using this strip
Retail Store & Shopfront Lighting
A shop fit-out team needs a bright, even light line inside a shallow coves and under shelves, without visible dots reflected in glossy product packaging or glass.
Cabinet, Showcase & Jewelry Display
A shopfitter needs a line inside a 60 mm deep cabinet that makes products stand out, does not show the strip itself, and runs cool enough not to scorch wood.
Before you order
Questions buyers ask about this strip
Why does my LED strip flicker?
Flicker is almost never the LED. It is the driver, the dimmer or a bad joint. Find which one in three steps.
Why is my LED strip dimmer at the far end of the reel?
Copper loses voltage on the way out and back. Past a certain length the last LEDs get less voltage, dim, and shift colour.
How do I get a light line with no visible LED dots?
The dots are the individual packages. Remove them with COB chips, higher density, or a diffuser — in that order of cost.
How do I size the power supply for an LED strip?
Total watts divided by 0.8, plus headroom. Undersizing is the cheapest saving and the most expensive mistake on site.
The strip I bought is not bright enough — is it the LEDs?
Brightness is watts × efficiency × LEDs per metre. Usually the density, not the power, is the missing number.
Same family
Other COB LED Strip options
Get the datasheet and a price for this strip
Send quantity, target CCT and delivery market. We answer with spec and price, usually in one working day.